PA66/70G33HS1-L / American DuPont 
 Manufacturer: USA DuPont 
 ① raw materials describe the part of the specification level injection of high-strength Color 
 The use of the material 
 Remarks characteristics: high-intensity 33% glass fiber 
 ② processing conditions and processing conditions 


 ③ raw technical data 
 Performance Project test conditions [state] method of testing information and data units 
 The basic performance of the water absorption saturation (23 ℃) ASTM D-570 5.4% 
 Water absorption of 24 hours of immersion (23 ° C) ASTM D-570 0.7% 
 The proportion of physical properties of ASTM D-792 1.38 
 Mechanical properties of elongation at break of 23 ℃, DAM ASTM D-638 3% 
 Elongation at break of 23 ℃, 50% RH ASTM D-638 4% 
 Tensile strength of 23 ℃, DAM ASTM D-638 196.1 MPa 
 Flexural modulus of 23 ℃, 50% RH ASTM D-790 6205 MPa 
 Tensile strength of 23 ℃, 50% RH ASTM D-638 124.1 MPa 
 Rockwell hardness M the DAM ASTM D-785 of M101 
 Flexural modulus of 23 ℃, DAM ASTM D-790 8963 MPa 
 Squeeze the shear strength of 23 ℃, DAM ASTM D-732 86 MPa 
 Taber abrasion volume 50% RH 14 cycles 
 Ezo impact strength 23 ° C, the DAM ASTM D-256 107 j / m 
 Ezo impact strength of 23 ℃, 50% RH ASTM D-256 133 j / m 
 Flexural strength of 23 ℃, DAM ASTM D-790 262 MPa 
 The electrical properties of dielectric strength (fractional step) DAM ASTM D-149 440 volts / mil 
 Dielectric constant 100% RH @ 106Hz He ASTM D-150 10.7 
 Dielectric constant 100% RH @ 103Hz He ASTM D-150 25.0 
 Volume resistivity of 100% RH ASTM D-257 109 ohm-cm 
 Dielectric constant of the DAM 106Hz He ASTM D-150 3.7 
 Dielectric strength DAM ASTM D-149 530 volts / mil 
 Loss factor DAM @ 103Hz He ASTM D-150 0.02 
 Volume resistivity DAM ASTM D-257 1015 ohm-cm 
 Dielectric constant of the DAM 103Hz He ASTM D-150 4.5 
 Loss factor DAM @ 106Hz He ASTM D-150 0.02 
 Thermal performance of heat distortion temperature 1.8MPa ASTM D-648 249 ℃ 
 Melting point of 50% RH ASTM D-789 255 ° C 
 Of DAM 255 ° C melting point of the ASTM D-789 
 Linear coefficient of thermal expansion ASTM D-696 2.3 × 10-5 / m / ° C 
 ④ certification