PA66/101F / American DuPont 
 Manufacturer: DuPont to enter the View Selling ① raw materials describe the part of the specification-level injection Other Color 
 The use of the material 
 Remarks 
 ② processing conditions and processing conditions 


 ③ raw technical data 
 Performance Project test conditions [state] method of testing information and data units 
 The basic performance of water absorption 24hr ASTM D-570 DAM | 50% RH 
 1.2 | - 
 % 
 Density ASTM D-792 the DAM | 50% RH 
 1.14 | - 
 g/cm3 
 Physical properties of flame retardant UL 94 DAM | 50% RH 
 0.71 | - 
 mm 
 Specific Gravity ASTM D-792 the DAM | 50% RH 
 1.14 | - 

 Mold shrinkage DAM | 50% RH 
 1.5 | - 
 % 
 Mechanical Properties Tensile Strength ASTM D-638 the DAM | 50% RH 
 83 | 64 
 MPa 
 Tensile Strength ASTM D-638 the DAM | 50% RH 
 83 | - 
 MPa 
 Elongation at break ASTM D-638 the DAM | 50% RH 
 50 |> 300 
 % 
 Flexural modulus ASTM D-790 DAM | 50% RH 
 2800 | 1210 
 MPa 
 Yield Elongation ASTM D-638 the DAM | 50% RH 
 4 | - 
 % 
 IZOD notched impact strength ASTM D-256 DAM | 50% RH 
 53 | 105 
 J / m 
 The electrical properties of dielectric strength 3.2mm ASTM D-149 DAM | 50% RH 
 16.5 | - 
 kv / mm 
 Volume resistivity of ASTM D-257 the DAM | 50% RH 
 1015 | - 
 Ω.cm 
 Dielectric constant 103Hz ASTM D-150 DAM | 50% RH 
 4.0 | - 

 Loss factor 103Hz ASTM D-150 DAM | 50% RH 
 0.02 | - 

 Dielectric constant 106Hz ASTM D-150 DAM | 50% RH 
 3.7 | - 

 Loss factor 106Hz ASTM D-150 DAM | 50% RH 
 0.02 | - 

 Loss factor 102Hz ASTM D-150 DAM | 50% RH 
 0.01 | - 

 Surface Resistivity ASTM D-257 the DAM | 50% RH 
 1014 | - 
 Ω 
 Dielectric strength 1.6mm ASTM D-150 the DAM | 50% RH 
 23.2 | - 
 kv / mm 
 The thermal performance of heat distortion temperature 1.80MPa ASTM D-648 DAM | 50% RH 
 65 | - 
 ℃ 
 Melting point ASTM D-3418, the DAM | 50% RH 
 262 | - 
 ℃ 
 Heat distortion temperature 0.45MPa ASTM D-648 DAM | 50% RH 
 210 | - 
 ℃