PA66/70G43L / USA DuPont 

 Manufacturer: USA DuPont 

 ① raw materials describe the part of the specification level injection Other Color 
 The use of the material 
 Remarks characteristics: high-intensity 43% glass fiber 
 ② processing conditions and processing conditions 


 ③ raw technical data 
 Performance Project test conditions [state] method of testing information and data units 
 The basic performance of water absorption of 24 hours immersion (23 ° C) ASTM D-570 0.6% 
 Water absorption and saturation (23 ° C) ASTM D-570 4.7% 
 The proportion of physical properties of ASTM D-792 1.51 
 Mechanical properties of the elongation at break 23 ° C, 50% RH ASTM D-638 3% 
 Elongation at break of 23 ° C, of ??DAM ASTM D-638 2% 
 Flexural modulus of 23 ° C, the DAM ASTM D-790 11 032 MPa 
 The Ezo impact strength 23 ° C, the DAM ASTM D-256 133 j / m 
 The tensile strength of 23 ° C, 50% RH ASTM D-638 144.7 MPa, 
 The tensile strength of 23 ° C, the DAM ASTM D-638 206.8 MPa, 
 Squeeze the shear strength of 23 ℃, the DAM ASTM D-732 93 MPa, 
 Rockwell hardness M-the DAM ASTM D-785 M103 
 Flexural modulus of 23 ℃, 50% RH ASTM D-790 8274 MPa 
 The Ezo impact strength of the 23 ℃, 50% RH ASTM D-256 186 j / m 
 Flexural strength of 23 ° C, the DAM ASTM D-790 285 MPa, 
 Electrical properties of dielectric strength (fractional step) the DAM ASTM D-149 to 410 volts. / Mil, 
 Thermal performance of heat distortion temperature 1.8MPa the ASTM D-648 252 MPa, 
 Melting point of 50% RH, the ASTM D-789 255 ° C 
 Linear coefficient of thermal expansion ASTM D-696 2.2 × 10-5 m, / m / ° C 
 Melting point of the DAM ASTM D-789 255 ° C